Every book on a library shelf sits in a precise spot, and that spot is no accident. Behind it lies a careful translation process that turns the words on a title page into a numerical code. Dr. S.R. Ranganathan, widely regarded as the father of library science in India, gave classifiers a disciplined sequence of steps to make this translation reliable and repeatable. Although he developed these steps alongside his own Colon Classification, the same logical procedure works beautifully when you classify books using the Dewey Decimal Classification (DDC). This post walks through that procedure, from a messy raw title to a verified class number, and shows how working librarians use it every day.

Table of Contents

Ranganathan’s steps at a glance

Ranganathan prescribed a procedure of successive steps for analysing the subject of a document and assigning it a class number. The steps are numbered from Step 0 through Step 8, and they move the classifier from plain natural language toward the artificial language of class numbers. Many textbooks refer to these as the eight sequential steps, treating the preliminary Step 0 as the starting point.

What makes this scheme powerful is that it separates the act of thinking about a subject from the act of writing its number. Ranganathan organised the work into three planes. Steps 0 to 4 belong to the idea plane, where you understand and analyse the subject. Step 5 belongs to the verbal plane, where you fix the right words. Steps 6 and 7 belong to the notational plane, where you build the actual number. Step 8 then re-examines the work across all three planes. This separation is why the method produces consistent results even when different people classify the same book.

From raw title to class number

The best way to understand the steps is to apply them to a real example. Consider a book titled “Elementary Education in India.” Here is how the subject moves through each step toward a DDC number.

Step 0: Write down the raw title

The raw title is simply the title as it appears on the document. In our case, that is “Elementary Education in India.” A classifier never trusts a title blindly, because publishers often choose catchy or incomplete titles, but it is always the starting reference point.

Step 1: Expand into the full title

The full title fills in any missing ideas, called ellipses, so that the subject is fully expressed. If a title hides its main discipline, you add it here. You also break compound terms into their constituent ideas. Our example already names the discipline (education) and the place (India), so the full title stays close to the original, but for a vaguer title this step does the heavy lifting of clarifying what the book is truly about.

Step 2: Reduce to the kernel title

The kernel title keeps only the meaningful terms and removes auxiliary words such as “of,” “in,” and “for.” These connecting words carry no subject meaning and do not need translating into the artificial language of notation. For our book, the kernel terms become: Education, Elementary, India.

Step 3: Analyse the title

In the analysed title, each kernel term is marked according to the fundamental category it represents. Ranganathan’s five categories, known by the formula PMEST – Personality, Matter, Energy, Space, and Time – give every idea a role. In our example, “Education” is the basic subject, “Elementary” describes the level (a Personality aspect), and “India” is the geographic component, which is a Space facet. Determining the right order of facets relies on principles such as the wall-picture principle, which states that a facet that depends on another for its meaning must follow it.

Step 4: Rearrange into the transformed title

The transformed title reorders the analysed terms according to their facet symbols, following the prescribed sequence of basic class first, then Personality, Matter, Energy, Space, and Time. For our book the order resolves to: Education (basic class), Elementary (Personality), India (Space). The subject is now structured logically rather than in the loose order of everyday speech.

Step 5: Express in standard terms

At the verbal plane, the title is rewritten using the standard vocabulary of the classification scheme. Natural-language terms are replaced with the exact words the scheme uses in its schedules and relative index. This matters because “primary education,” “elementary education,” and “basic schooling” may all point to the same DDC concept, and only the standard term will lead you to the correct number.

Step 6: Translate into facet numbers

Now you enter the notational plane. Each standard term is replaced by its number from the schedules and tables. Using DDC, “Elementary education” gives the base number 372 from the schedules, and “India” gives the area notation -54 from Table 2. The DDC builds many numbers by synthesis, drawing notation from its standard subdivisions, area tables, and other parts of the schedules.

Step 7: Assemble the class number

The class number is created by joining the facet numbers with the correct connecting symbols and removing the analysis marks. In DDC, the geographic treatment is added to the base, producing 372.954 for “Elementary Education in India.” A decimal point always follows the third digit, since no DDC class number is shorter than three digits and the decimal keeps long numbers readable.

Step 8: Verify by reverse translation

The final step translates the finished number back into words to confirm it says exactly what the book is about. Reading 372.954 digit by digit gives “elementary education” plus “India,” which matches the subject precisely. If the reverse reading does not match the book, you go back and find the error.

Why verification matters so much

It is tempting to stop once a number is built, but Step 8 is what separates careful classification from guesswork. A misplaced book is, for practical purposes, a lost book. If a reader cannot find it on the shelf, the entire effort of acquiring and processing it is wasted.

Verification guards against several common mistakes. Classifiers can be misled by titles that suggest one subject while the book actually treats another. A book called “The Green Revolution” might belong under agriculture, economics, or history depending on its real focus, so the discipline must be confirmed, not assumed. DDC is organised by discipline rather than by subject, which means the same topic can sit in different classes depending on how it is treated. A book on clothing, for instance, could fall under psychology, social customs, or fashion design. Reverse translation forces the classifier to check that the chosen discipline truly fits the content.

Verification also catches notational errors. When numbers are synthesised from several tables, it is easy to drop a digit or join facets in the wrong order. Reading the number back is a quick, reliable check that the synthesis followed the rules.

Consistency across a collection

Verification protects a deeper goal: consistency. A library may add thousands of books over the years, often classified by different staff members. The eight steps act as a shared discipline so that similar books receive similar numbers regardless of who does the work. This is precisely why a methodical procedure beats individual judgement. The DDC is used in more than 135 countries, and that global consistency depends on classifiers everywhere following a rigorous, checkable process.

Applying the steps in real libraries

In day-to-day practice, experienced classifiers do not always write out all eight steps on paper. With familiar subjects, much of the analysis happens mentally in a few seconds. But the underlying logic never changes, and for complex or unfamiliar titles, working through the steps explicitly remains the safest approach.

Using the DDC summaries to start

A classifier usually begins by placing the book in one of the ten main classes, then narrowing down. The DDC summaries make this efficient. The first summary lists the ten main classes, the second lists the hundred divisions, and the third lists the thousand sections. Moving from summary to schedule mirrors Ranganathan’s movement from broad idea to specific notation. For our example, you would move from 300 Social sciences, to 370 Education, to 372 Elementary education, before adding the area notation.

Handling reclassification and digital resources

The steps prove their worth during large reclassification projects, when a library shifts editions or reorganises a collection. Librarians typically prioritise high-use or problematic sections first, process similar materials in batches, and document their decisions so future staff can follow the same reasoning. The same analytical thinking now extends to digital collections. When assigning metadata to e-books or institutional repository items, classifiers still identify the discipline, choose standard terms, and assign a DDC number that enables subject browsing across both physical and electronic formats.

Reading the book, not just the title

One habit unites every skilled classifier: they examine the contents page, preface, and introduction rather than relying on the title alone. Ranganathan’s Step 0 deliberately treats the title as raw material precisely because titles deceive. A textbook for a B.Lib.I.Sc. course in an Indian university, for example, may carry a broad title while focusing narrowly on one technique, and only reading the book reveals its true subject.

What do you think? When you next pick a book off a shelf, can you trace backwards through these eight steps to see why it landed in its particular spot? And in an age of digital search and AI-driven discovery, do you think a methodical, human-verified classification process still adds value, or will automated subject tagging eventually replace it?

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://en.wikipedia.org/wiki/S._R._Ranganathan
  2. https://www.miskatonic.org/library/prolegomena.html
  3. https://www.oclc.org/content/dam/oclc/dewey/versions/print/intro.pdf
  4. https://guides.acu.edu/Dewey
  5. https://en.wikipedia.org/wiki/List_of_Dewey_Decimal_classes
  6. https://www.oclc.org/content/dam/oclc/dewey/resources/summaries/deweysummaries.pdf
  7. https://libguides.ala.org/catalogingtools/classification

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Document Processing – Practice

1 Introduction, Structure and Organisation

  1. 19th Edition of DDC
  2. Notation
  3. Properties of Decimal Fractions
  4. Basic Plan and Convention of a Minimum of Three Digits
  5. Volume 1: Introduction and Tables
  6. Volume 2: Schedules
  7. Volume 3: Relative Index
  8. Transcription of a Class Number
  9. Numbers in Square Brackets, Obsolete Entries

2 Definitions, Notes and Instructions

  1. Definitions, Explanation and Scope
  2. Different Types of Notes
  3. Inclusion Notes
  4. Class Here’ Notes
  5. Class Elsewhere’ Notes
  6. Class … in…’ Notes
  7. For… see…’ Notes
  8. Class comprehensive works in…’ Notes
  9. Notes Appearing under Discontinued (Bracketed) Entries
  10. Importance of Various Notes
  11. Centred Heading/Centred Entry
  12. Number Building Notes

3 Introduction to Three Summaries and Steps in Classifying Documents

  1. Ten Main Classes
  2. Second Summary of 100 Divisions
  3. Third Summary of 1000 Sections
  4. Multi-Level Summaries
  5. Steps in Classifying Documents
  6. Subject Analysis
  7. Steps in Practical Classification

4 Relative Index and Its Use

  1. Need and Importance
  2. Nomenclature: Relative Index
  3. Scope of the Index
  4. Organisation of the Index
  5. Numbers Given Against Entries

5 Study of Tables and Schedules

  1. Tables
  2. Schedules

6 Auxiliary Tables and Devices

  1. Number-Building with Tables
  2. Use of Table 1: Standard Subdivisions
  3. Use of Table 2: Areas
  4. Table 3: Subdivisions of Individual Literatures
  5. Use of Table 4: Subdivisions of Individual Languages
  6. Use of Table 6: Languages
  7. Use of Table 5: Racial, Ethnic, National Groups
  8. Use of Table 7: Persons

7 Practical Classification

  1. Simple Synthesis
  2. Multiple Synthesis
  3. Order of Precedence
  4. Other Means for Fixing Priority of Numbers
  5. Table of Precedence for Standard Subdivisions

8 AACR-2R Preliminaries

  1. Structure of AACR-2R
  2. Levels of Description
  3. Style of Writing
  4. Types of Entries
  5. Items in the Catalogue Entry
  6. Skeleton Card
  7. Added Entries and Tracing Section
  8. Subject Headings

9 Choice and Rendering of Headings and Statement of Responsibility

  1. Personal Author
  2. Heading for Personal Author
  3. Western Names
  4. Indian Names
  5. Cataloguing Practice
  6. Single Personal Author
  7. Shared Responsibility
  8. Books under Editorial Direction
  9. Pseudonymous Authors
  10. Corporate Bodies

10 Cataloguing Multivolumes, Serial Publications and Nonprint Media

  1. Multi-volume Books
  2. Serial Publications
  3. Cataloguing of Non-Print Media

11 Marc-21 Cataloguing

  1. MARC Standards
  2. MARC 21 Structure
  3. MARC 21 Tags and Subfields

12 Structure of Sears List of Subject Headings (18th Edition)

  1. History of the Sears List
  2. Features of the 18th Edition
  3. Principles of Vocabulary Control
  4. Principles of the Sears List
  5. Structure of the Sears List
  6. Grammar of the Subject Headings
  7. Key Headings
  8. Adding Subdivisions
  9. Categories of Subject Headings Omitted
  10. Limitations

13 Keyword Indexing

  1. Keyword Indexing – Concept
  2. Structure and Format of Keyword Indexing
  3. Indexing Process
  4. Variants of Keyword Indexing
  5. Advantages and Disadvantages of Keyword Indexing

14 Chain Indexing (DDC – 19th Edition)

  1. Classified Catalogue
  2. Problems of Subject Cataloguing
  3. Advent of Chain Indexing
  4. Mechanism of Chain Indexing
  5. Step by Step Method
  6. Working with the DDC
  7. Preparation of Class Index Entries (CIEs)
  8. Chain Indexing for a Dictionary Catalogue
  9. Advantages of Chain Indexing
  10. Limitations and Problems of Chain Indexing