When you walk into a library and search the classified catalogue by subject, you rarely think about the careful work that lets you find “Hinduism” or “History of India” through an alphabetical list. That bridge between everyday words and the numerical shelf order is built by Class Index Entries (CIEs). They are the access points that translate a class number back into the language a reader actually uses. This post walks through what CIEs are, the three parts that make them up, how to build them for real subjects using the Dewey Decimal Classification (DDC) 19th edition, and how to refine and cross-reference them so users never hit a dead end.

Table of Contents

What are class index entries?

A classified catalogue is always bipartite. It has a classified part, where the main entries sit in the order of their class numbers, and an alphabetical part, where subjects are arranged by word. The classified part follows the logic of the classification scheme, which most readers do not know. They cannot guess that Indian history hides under 954 or that Hinduism lives at 294.5. So the alphabetical part exists to take them there, and the Class Index Entry is its building block.

In simple terms, a CIE is a subject heading that refers a reader from the name of a class to its class number. It is the verbal key that unlocks the numerical arrangement. In a dictionary catalogue, the same function is performed by what are called Subject Added Entries, but in the classified catalogue we call them Class Index Entries.

The headings for these entries are not invented freely. They are derived mechanically through Chain Indexing (also called Chain Procedure), a method devised by Dr. S. R. Ranganathan in the 1930s to derive subject headings from a class number. The cataloguer begins where the classifier left off, interpreting the class number digit by digit in reverse to produce the words a user is likely to search.

One practical point makes CIEs efficient. Because a class index entry can serve every book that shares the same class number, it is prepared only once. If twenty books carry the number 954, a single set of CIEs for 954 indexes all of them. This avoids duplication and saves the cataloguer’s time, which is one reason chain indexing remains a teaching staple in LIS courses.

Three key components of a CIE

Every class index entry is made of three parts. Understanding them is the foundation for everything that follows.

The subject heading

This is the leading or heading section, the word or phrase that names the class. It is the term a reader would look up alphabetically, such as “History” or “Hinduism.” This heading is derived from the sought links of the chain and forms the entry word under which the CIE is filed.

The directing element

The second part is the directing element, the connecting phrase that tells the reader where to go. In practice this is the instruction “For documents on this and allied subjects, see the Classified Part of the catalogue under the Class Number.” It links the verbal heading to the numerical shelf order, guiding the user from the alphabetical part into the classified part.

The class index number

The third part is the class index number, the corresponding class number from the scheme in use. This is the destination. For a book on Indian history the number would be 954; for one on Hinduism it would be 294.5. Together these three parts, as the IGNOU course material explains, make a complete entry: the subject heading, the directing element, and the class index number.

How chain indexing produces the headings

Before working through examples, it helps to see how the words are extracted. Chain indexing unwinds the class number one digit at a time, and each step is called a link. The cataloguer reads from the most specific link back to the most general, a process known as reverse rendering. Not every link becomes an entry, so each one must be judged.

There are four kinds of links to recognise. A sought link is a concept a user is likely to search for, and each sought link generates one Class Index Entry. An unsought link is a valid concept that users are unlikely to approach, so no entry is made for it. A false link is a connecting symbol or indicator digit that carries no concept of its own and is always ignored. A missing link represents a concept absent from the scheme, which the indexer supplies by verbal extension when needed. The number of CIEs you prepare equals the number of sought links in the chain.

A useful rule of thumb: the first link is always sought, and the last link is also sought unless it ends in a time facet. When a link sits on the fence between sought and unsought, give it the benefit of the doubt and treat it as sought, since judgement here only sharpens with practice.

Example-based demonstration: a book on Indian history

Take a book whose subject is the history of India. In DDC 19th edition this is classed at 954, Indian History. To build the chain we trace the number from general to specific and then render it in reverse.

The chain of class numbers runs like this: 900 is History, 950 is History of Asia, and 954 is History of India. Reading backwards and assigning headings to each sought link, the Class Index Entries become:

India, History 954
Asia, History 950
History 900

Each line names a class and points to its number through the directing element. A reader who searches “India” under history is sent to 954; one who only knows the broad term “History” is sent to 900 and can then browse downward. Notice how the specific entry sits alongside the broader ones so that both the precise searcher and the general browser are served.

If the book were narrower, say the Indian freedom struggle, the chain would extend further. DDC places modern Indian history under 954.03 onward, so an additional sought link for the independence period would generate its own entry pointing to the deeper number, while the entries for India, Asia, and History above it stay exactly as before.

Example-based demonstration: a book on religion

Now consider a dictionary of Hinduism. In DDC the relevant number is 294.5, which is dedicated to Hinduism, sitting within the religion class. The chain moves from the broad class of religion down to the specific faith.

The chain reads: 200 is Religion, 290 is Other religions (comparative religion), and 294.5 is Hinduism. Rendered in reverse, the Class Index Entries are:

Hinduism 294.5
Religion 200

Here the intermediate link for 290 may be treated as unsought, because few readers look for a book specifically under the umbrella term “other religions” rather than under the named faith or the broad word “religion.” This is exactly the kind of sought-versus-unsought judgement the cataloguer makes at each step, and it directly controls how many entries appear in the catalogue.

The two examples together show the pattern. History and religion are both deep, branching subjects where many subfields overlap, and chain indexing breaks them into a clean ladder of headings so a user can climb in at whatever level of specificity they know.

Editing and refining subject headings

Deriving the raw chain is only half the job. The headings then need editing so they read naturally and remove ambiguity. A well-made CIE should be as plain as possible.

Make the context clear

Sometimes a single word is too bare to be useful. The IGNOU material notes that individualising elements may be added to make the context clear when it is not already obvious. A heading like “History” gains meaning when qualified, and combined headings such as “Hinduism, India, History” specify both the religion and its geographic and temporal context for a book that covers all three.

Use accepted terminology

Headings should use the term most readers would actually search, not the most technical label from the schedule. If the scheme’s wording is archaic or unusual, prefer the common form as the entry word and connect the technical form through a reference. The goal is that the heading matches the user’s own vocabulary.

Keep entries consistent

Across the whole catalogue, the same concept should always be rendered the same way. Consistency in word order, qualifiers, and spelling is what lets readers predict where to look. Editing is the stage where you enforce that uniformity before the entries are filed.

Cross-references and variants

Even a clean set of CIEs leaves gaps, because readers use different words for the same idea and approach a subject from different levels. Cross-references close those gaps.

Ranganathan’s rules require linking the sought levels of a chain to one another. Under Rule KSD 499, there is to be a “see also” subject entry corresponding to each of the sought links of the chain, whether they are upper or lower to the link that supplied the main heading. For the Hinduism example, this means the entry under “Religion” can carry a “see also Hinduism” pointer, so a reader who starts broad is guided toward the more specific material rather than stopping at the general number.

Handling spelling and terminology variants

Subjects often have more than one accepted name or spelling. A see reference sends the user from the form they did not expect to the form actually used in the catalogue. If your chosen heading is “Hinduism,” you might add references from related or alternative wordings; if a subject has British and American spellings, the unused spelling points to the preferred one. These references add no new shelf location, they only redirect vocabulary, but they are what make the catalogue forgiving of how each person phrases a search.

Why variants matter for retrieval

It has aptly been said that words are the ultimate key to information retrieval. A catalogue can hold the right book at the right number, yet still fail if the reader’s word never connects to it. Cross-references and variant handling are the safety net that catches the searcher who uses a synonym, an older term, or a broader category, and quietly steers them to the entry that works.

What do you think? If you were cataloguing a book on the history of Hinduism in India, how would you decide which links in the chain are genuinely “sought” by your users rather than just valid concepts? And as library catalogues become more automated, do you think the human judgement at the heart of chain indexing can be fully replaced by software?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://ebooks.inflibnet.ac.in/lisp3/chapter/subject-cataloguing-chain-procedure-popsi-and-precis/
  2. https://www.librarianshipstudies.com/2017/04/chain-indexing.html
  3. https://egyankosh.ac.in/bitstream/123456789/38416/5/Unit-14.pdf
  4. https://testbook.com/question-answer/in-chain-indexing-which-of-the-following-links-de–650c3c8d4923ef03773ca579
  5. https://gnlu.ac.in/Library/Class-Numbers
  6. https://www.librarything.com/mds/954
  7. https://www.librarything.com/mds/294.5

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Document Processing – Practice

1 Introduction, Structure and Organisation

  1. 19th Edition of DDC
  2. Notation
  3. Properties of Decimal Fractions
  4. Basic Plan and Convention of a Minimum of Three Digits
  5. Volume 1: Introduction and Tables
  6. Volume 2: Schedules
  7. Volume 3: Relative Index
  8. Transcription of a Class Number
  9. Numbers in Square Brackets, Obsolete Entries

2 Definitions, Notes and Instructions

  1. Definitions, Explanation and Scope
  2. Different Types of Notes
  3. Inclusion Notes
  4. Class Here’ Notes
  5. Class Elsewhere’ Notes
  6. Class … in…’ Notes
  7. For… see…’ Notes
  8. Class comprehensive works in…’ Notes
  9. Notes Appearing under Discontinued (Bracketed) Entries
  10. Importance of Various Notes
  11. Centred Heading/Centred Entry
  12. Number Building Notes

3 Introduction to Three Summaries and Steps in Classifying Documents

  1. Ten Main Classes
  2. Second Summary of 100 Divisions
  3. Third Summary of 1000 Sections
  4. Multi-Level Summaries
  5. Steps in Classifying Documents
  6. Subject Analysis
  7. Steps in Practical Classification

4 Relative Index and Its Use

  1. Need and Importance
  2. Nomenclature: Relative Index
  3. Scope of the Index
  4. Organisation of the Index
  5. Numbers Given Against Entries

5 Study of Tables and Schedules

  1. Tables
  2. Schedules

6 Auxiliary Tables and Devices

  1. Number-Building with Tables
  2. Use of Table 1: Standard Subdivisions
  3. Use of Table 2: Areas
  4. Table 3: Subdivisions of Individual Literatures
  5. Use of Table 4: Subdivisions of Individual Languages
  6. Use of Table 6: Languages
  7. Use of Table 5: Racial, Ethnic, National Groups
  8. Use of Table 7: Persons

7 Practical Classification

  1. Simple Synthesis
  2. Multiple Synthesis
  3. Order of Precedence
  4. Other Means for Fixing Priority of Numbers
  5. Table of Precedence for Standard Subdivisions

8 AACR-2R Preliminaries

  1. Structure of AACR-2R
  2. Levels of Description
  3. Style of Writing
  4. Types of Entries
  5. Items in the Catalogue Entry
  6. Skeleton Card
  7. Added Entries and Tracing Section
  8. Subject Headings

9 Choice and Rendering of Headings and Statement of Responsibility

  1. Personal Author
  2. Heading for Personal Author
  3. Western Names
  4. Indian Names
  5. Cataloguing Practice
  6. Single Personal Author
  7. Shared Responsibility
  8. Books under Editorial Direction
  9. Pseudonymous Authors
  10. Corporate Bodies

10 Cataloguing Multivolumes, Serial Publications and Nonprint Media

  1. Multi-volume Books
  2. Serial Publications
  3. Cataloguing of Non-Print Media

11 Marc-21 Cataloguing

  1. MARC Standards
  2. MARC 21 Structure
  3. MARC 21 Tags and Subfields

12 Structure of Sears List of Subject Headings (18th Edition)

  1. History of the Sears List
  2. Features of the 18th Edition
  3. Principles of Vocabulary Control
  4. Principles of the Sears List
  5. Structure of the Sears List
  6. Grammar of the Subject Headings
  7. Key Headings
  8. Adding Subdivisions
  9. Categories of Subject Headings Omitted
  10. Limitations

13 Keyword Indexing

  1. Keyword Indexing – Concept
  2. Structure and Format of Keyword Indexing
  3. Indexing Process
  4. Variants of Keyword Indexing
  5. Advantages and Disadvantages of Keyword Indexing

14 Chain Indexing (DDC – 19th Edition)

  1. Classified Catalogue
  2. Problems of Subject Cataloguing
  3. Advent of Chain Indexing
  4. Mechanism of Chain Indexing
  5. Step by Step Method
  6. Working with the DDC
  7. Preparation of Class Index Entries (CIEs)
  8. Chain Indexing for a Dictionary Catalogue
  9. Advantages of Chain Indexing
  10. Limitations and Problems of Chain Indexing