Open any volume of the Dewey Decimal Classification (DDC) and you will notice that a class number is rarely left to stand alone. Beneath almost every heading sits a small cluster of instructions printed in smaller type. These are the notes, and they do far more heavy lifting than their size suggests. A three-digit number tells you where a subject sits; the notes tell you what actually belongs there, what does not, and where the strays should go instead. Without them, two librarians could read the same heading and reach completely different decisions. This post walks through the main types of notes in DDC, the role each one plays, and why mastering them is the difference between guessing and classifying.

Table of Contents

Why notes matter in DDC

The DDC organises knowledge by discipline rather than by subject, which means the same topic can scatter across several classes. Clothing, for instance, appears under psychology, customs, and fashion design depending on the angle a book takes. A bare heading cannot capture this complexity. Notes fill the gap by supplying information that is not obvious from the notation or the heading alone, covering matters of order, structure, and subordination.

According to the official Introduction to the DDC published by OCLC, notes are important precisely because they carry meaning that the numbers cannot. They clarify the intended scope of a number, distinguish it from neighbouring numbers, and tell the classifier how to handle subjects that could plausibly land in more than one place. In practice, a classifier facing an ambiguous book turns to the notes to answer three questions: what does this number cover, where does it end, and which number wins when subjects overlap.

There is another reason notes carry weight. Many of them have what DDC calls hierarchical force. This means a note attached to a broad number automatically applies to all the narrower numbers beneath it. A scope note written once at 700 governs the subdivisions for sculpture, metalwork, and even coins far below it, so the note does not need to be repeated at every level. The classifier is therefore expected to read up and down the schedules, not just glance at a single line.

The order in which notes appear

Notes are not scattered randomly under an entry. They follow a fixed sequence, beginning with definition and scope notes, moving through including and class-here notes, and ending with class-elsewhere notes and references. Knowing this order helps a classifier read an entry quickly, because each note type occupies a predictable position and signals a predictable function.

Definition and scope notes

The first job of a note is often simply to pin down meaning. A definition note states what a term in the heading actually means. Under 364 Criminology, for example, the definition note explains the class as covering crime and its alleviation, removing any doubt about whether the number is meant for the study of crime or for something narrower.

A scope note goes a step further. It tells you whether the meaning of a number is broader or narrower than the heading would suggest. The OCLC Introduction gives the example of 700 The arts, where a scope note lists description, critical appraisal, techniques, procedures, apparatus, equipment, and materials of the fine, decorative, literary, performing, and recreational arts. The single word “arts” in the heading hides all of this, and the scope note makes it explicit. The OCLC glossary of DDC terms treats scope notes as a distinct, named category for exactly this reason.

Illustrative examples in notes

Scope and class-here notes frequently lean on examples to make a boundary concrete. Rather than describe an abstract limit, the note simply lists representative topics. In the mineralogy schedule, the entry for the physical properties of minerals points the classifier toward concrete instances such as the mechanical properties of minerals alongside optical and other physical characteristics. The example does two things at once: it confirms that such a topic belongs at that number, and it signals the kind of material the number is meant to gather.

This use of examples matters because real books rarely match a heading word for word. A study on the hardness, cleavage, and elasticity of minerals may never use the textbook phrase from the schedule. The example in the note acts as a bridge, letting the classifier recognise that a book on mineral toughness fits comfortably under the physical-properties number. The Australian Museum describes mechanical and physical properties of minerals such as hardness, cleavage, and magnetism, and it is precisely this body of literature that an illustrative note is designed to capture in one place.

Including notes and class-here notes

Two note types deal with what to gather at a number, but they work differently, and confusing them is a common beginner error.

An including note identifies topics that have what DDC calls “standing room”. These are subjects with too little literature to deserve their own number yet, so they are parked at a broader number until their literature grows. Under 362.16 Extended care medical facilities, an including note covers convalescent homes and sanatoriums for people with chronic diseases. The catch is significant: topics in standing room cannot take standard subdivisions or other number-building, because they do not represent the whole of the number.

A class-here note behaves differently. It lists major topics that approximate the whole of the class, whether those topics are broader, narrower, or simply another way of looking at the same material. The Introduction gives 371.04 Alternative schools, where a class-here note brings in experimental schools and free schools. Because these topics approximate the whole, standard subdivisions can be added to them. Class-here notes also do the important work of marking where comprehensive and interdisciplinary works belong, as the Dewey blog maintained by the editorial team explains in detail.

Why the difference is practical, not academic

The distinction decides whether you may build a longer, more specific number. Add a standard subdivision to a standing-room topic and you have created a number that misrepresents the book. The Introduction is blunt about this: standard subdivisions are added only for works that cover or approximate the whole of the subject of the number. Reading whether a topic sits in an including note or a class-here note is therefore a direct instruction about what you are allowed to do next.

Class-elsewhere notes and references

Some notes exist to send you away rather than invite you in. A class-elsewhere note redirects the classifier to a related topic that lives in a different part of the schedules, or distinguishes between numbers that sit close together. The Introduction notes a useful rule of thumb: almost every note that begins with the word “class” is a class-elsewhere note, the sole exception being notes that begin with “class here”. Under 641.7 Specific cooking processes and techniques, a class-elsewhere note pushes processes applied to specific materials over to 641.6 and processes for specific dishes to 641.8.

Alongside these sit two kinds of references. A see reference leads from a comprehensive number to the scattered parts of that concept elsewhere; each one begins with the word “For” and is printed in italics. A see-also reference is a gentler nudge, reminding the classifier that small differences in wording can imply different classification. Under 599.65 Deer, a see-also reference points to mouse deer at 599.63, a reminder that the everyday word “deer” does not always map to a single number.

Exclusion notes in action

The clearest example of redirection is the exclusion-style note, which states plainly that certain subjects do not belong despite seeming to fit. The performing-arts area of the 700s is a textbook case. Public performances sit broadly in this region, yet the schedules deliberately split off two large bodies of material: music performances are gathered in 780, and athletic contests and sports go to 796. A note at the public-performance number signals that these apparently related topics are intentionally classed elsewhere.

This separation looks counterintuitive until you remember that DDC arranges by discipline. A concert and a football match are both public performances in plain English, but the literature on music and the literature on sport serve different readers and behave like different disciplines. Exclusion notes prevent the well-meaning mistake of dumping every “performance” into one drawer, which would scatter related works and frustrate users searching a shelf. They are, in effect, guard rails that keep intuitive errors from creeping into the catalogue.

Notes that signal change in the schedules

A final family of notes records how the system itself evolves. Relocation notes state that the contents of a number have moved elsewhere, while discontinued notes mark numbers that have been emptied into a more general number or dropped. The Introduction illustrates this with folklore at 398, where interdisciplinary works on chapbooks were relocated to 002. There are also do-not-use notes, which forbid the regular standard-subdivision notation and send the classifier to a special provision instead.

These notes matter most when a library works across editions. A number that was valid a decade ago may now be bracketed or reassigned, and the relocation note is the trail that connects the old practice to the new. Ignoring them produces a catalogue that quietly drifts out of step with current Dewey practice, which is why the Dewey Section at the Library of Congress, where DDC numbers are assigned daily, treats these signals as part of routine maintenance rather than optional reading.

Reading an entry as a whole

The real skill is not memorising note types in isolation but reading an entry as an integrated set of instructions. A single number may carry a scope note that widens its meaning, an including note that parks a minor topic, a class-here note that admits comprehensive works, and a class-elsewhere note that fences out a neighbour, all stacked in order. Each line modifies the others. A classifier who reads only the heading sees a label; a classifier who reads the notes sees the rules of the game.

This is also why DDC remains usable across more than a hundred countries despite the sheer scale of human knowledge it has to organise. The notes encode decades of editorial judgement so that an individual cataloguer does not have to reinvent it. Learning to read them turns the schedules from a list of numbers into a working set of decisions you can apply with confidence.

What do you think? When you next classify a book that seems to straddle two subjects, which note would you check first to settle the question? And can you recall a topic that intuitively felt like it belonged together with another, only for an exclusion note to send it somewhere completely different?

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.oclc.org/content/dam/oclc/webdewey/help/introduction1.pdf
  2. https://help.oclc.org/Librarian_Toolbox/OCLC_glossaries/Dewey_Decimal_Classification_glossary
  3. https://australian.museum/learn/minerals/properties/
  4. https://ddc.typepad.com/025431/2017/12/class-here-notes.html
  5. https://www.loc.gov/aba/dewey/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Document Processing – Practice

1 Introduction, Structure and Organisation

  1. 19th Edition of DDC
  2. Notation
  3. Properties of Decimal Fractions
  4. Basic Plan and Convention of a Minimum of Three Digits
  5. Volume 1: Introduction and Tables
  6. Volume 2: Schedules
  7. Volume 3: Relative Index
  8. Transcription of a Class Number
  9. Numbers in Square Brackets, Obsolete Entries

2 Definitions, Notes and Instructions

  1. Definitions, Explanation and Scope
  2. Different Types of Notes
  3. Inclusion Notes
  4. Class Here’ Notes
  5. Class Elsewhere’ Notes
  6. Class … in…’ Notes
  7. For… see…’ Notes
  8. Class comprehensive works in…’ Notes
  9. Notes Appearing under Discontinued (Bracketed) Entries
  10. Importance of Various Notes
  11. Centred Heading/Centred Entry
  12. Number Building Notes

3 Introduction to Three Summaries and Steps in Classifying Documents

  1. Ten Main Classes
  2. Second Summary of 100 Divisions
  3. Third Summary of 1000 Sections
  4. Multi-Level Summaries
  5. Steps in Classifying Documents
  6. Subject Analysis
  7. Steps in Practical Classification

4 Relative Index and Its Use

  1. Need and Importance
  2. Nomenclature: Relative Index
  3. Scope of the Index
  4. Organisation of the Index
  5. Numbers Given Against Entries

5 Study of Tables and Schedules

  1. Tables
  2. Schedules

6 Auxiliary Tables and Devices

  1. Number-Building with Tables
  2. Use of Table 1: Standard Subdivisions
  3. Use of Table 2: Areas
  4. Table 3: Subdivisions of Individual Literatures
  5. Use of Table 4: Subdivisions of Individual Languages
  6. Use of Table 6: Languages
  7. Use of Table 5: Racial, Ethnic, National Groups
  8. Use of Table 7: Persons

7 Practical Classification

  1. Simple Synthesis
  2. Multiple Synthesis
  3. Order of Precedence
  4. Other Means for Fixing Priority of Numbers
  5. Table of Precedence for Standard Subdivisions

8 AACR-2R Preliminaries

  1. Structure of AACR-2R
  2. Levels of Description
  3. Style of Writing
  4. Types of Entries
  5. Items in the Catalogue Entry
  6. Skeleton Card
  7. Added Entries and Tracing Section
  8. Subject Headings

9 Choice and Rendering of Headings and Statement of Responsibility

  1. Personal Author
  2. Heading for Personal Author
  3. Western Names
  4. Indian Names
  5. Cataloguing Practice
  6. Single Personal Author
  7. Shared Responsibility
  8. Books under Editorial Direction
  9. Pseudonymous Authors
  10. Corporate Bodies

10 Cataloguing Multivolumes, Serial Publications and Nonprint Media

  1. Multi-volume Books
  2. Serial Publications
  3. Cataloguing of Non-Print Media

11 Marc-21 Cataloguing

  1. MARC Standards
  2. MARC 21 Structure
  3. MARC 21 Tags and Subfields

12 Structure of Sears List of Subject Headings (18th Edition)

  1. History of the Sears List
  2. Features of the 18th Edition
  3. Principles of Vocabulary Control
  4. Principles of the Sears List
  5. Structure of the Sears List
  6. Grammar of the Subject Headings
  7. Key Headings
  8. Adding Subdivisions
  9. Categories of Subject Headings Omitted
  10. Limitations

13 Keyword Indexing

  1. Keyword Indexing – Concept
  2. Structure and Format of Keyword Indexing
  3. Indexing Process
  4. Variants of Keyword Indexing
  5. Advantages and Disadvantages of Keyword Indexing

14 Chain Indexing (DDC – 19th Edition)

  1. Classified Catalogue
  2. Problems of Subject Cataloguing
  3. Advent of Chain Indexing
  4. Mechanism of Chain Indexing
  5. Step by Step Method
  6. Working with the DDC
  7. Preparation of Class Index Entries (CIEs)
  8. Chain Indexing for a Dictionary Catalogue
  9. Advantages of Chain Indexing
  10. Limitations and Problems of Chain Indexing